Simulation of Boiling in a Vertical Channel Using Ensemble Average Model

Document Type : Research Article

Authors

Department of Mechanical Engineering, Eastern Mediterranean University, G. Magosa, North Cyprus, TURKEY

Abstract

Simulation of turbulence boiling, generation of vapour and predication of its behaviour are still subject to debate in the two-phase flow area and they receive a high level of worldwide attention. In this study, a new arrangement of the three dimensional governing equations for turbulence two-phase flow with heat and mass transfer are derived by using ensemble averaging two-fluid model and utilizing the latest approved constitutive equations. Then, the governing equations are simplified for bulk boiling in a vertical channel. A computer program with SIMPLE algorithm is written for the simplified equations, and the results are compared with available experimental data and a boiling water reactor in operating condition.  

Keywords


[1]  Ishii, M., Hiblki, T., Revankar, S. T., Kim, S. and Le Corre, J.M., “Interfacial Area and Interfacial Transfer in Two-Phase Flow Systems”, DOE Final Report - PU/NE-02-06-U.S. Department of Energy, Office of Basic Energy Science, (2002).
[2] Lahey Jr., R.T., The Simulation of Multidimensional Multiphase Flows, J. Nuclear Eng. and Design, 235, 1043 (2005).
[3] Zboray, R. and Cachard, F. de, Simulating Large-Scale Bubble Plumes Using Various Closure and Two-Phase Turbulence Models, J. Nuclear Eng. and Design, 235, 867 (2005).
[4] Ishii, M., “Thermo-Fluid Dynamic Theory of Two-Phase Flow”, Eyrolles Publications, France, (1975).
[5] Delhaye, J.M., Local Time Averaged Equations, Two- Phase Flows and Heat Transfer, 1, 91 (1976).
[6] Nigmatulin, R. I., Spatial Averaging in the Mechanics of Heterogeneous and Dispersed Systems, Int. J. Multiphase Flow, 5, 353 (1979).
[7] Buyevich, Y. A., Kinematics of Mass Transfer Between a Polydispersed Particle System and Surroundings Media, J. Appl. Mech. And Tech. Phys., 7, 32 (1966).
[8] Bachelor, G. K., The Stress System in a Suspension of Force-Free Particles, J. Fluid Mech., 42, 545 (1970).
[9] Drew, D.A., Averaged Field Equations for Two- Phase Media, Studiesin Applied Math., 1, 133 (1971).
[10] Iwanaga, M. and Ishihara, T., Volume Averaged Expression of Two-Phase Flow, Bull. JEME, 23, 1124 (1980).
[11] Gray, W.C., Local Volume Averaging of Multiphase Systems Using a Non-Constant Averaging Volume, Int. J. Multiphase Flow, 9, 755 (1983).
[12] Bataille,  J., “Averaged  Field  Equations   for Multi-phase Flows” (Report No. GEOFLO/9), Brown University, Division of Energy, USA. (1981).
[13] Arnold G. S., “Entropy and Objectivity as Constraints Upon Constitutive Equations for Two-Fluid Modeling of Multiphase Flow”, PhD Dissertation, Rensselaer Polytechnic Institute, Troy, NY 12180-3590, USA, (1988).
[14] Park, J.W., Void Wave Propagation in Two-Phase Flow, PhD. Dissertation, “Rensselaer Polytechnic Institute”, Troy, NY 12180-3590, USA., (1992).
[15] Arnold, G.S.,  Drew,  D.A.  and  Lahey,  R.T., Derivation of Constitutive Equations for Interfacial Force and Reynolds Stress for a Suspension of Sphere Using Ensemble Cell Averaging, Chemical Eng. Communication, 86, 376 (1989).
[16] Antal. S. P., “Phase Distribution in Bubbly Two-Phase Flows, PhD. Dissertation”, Rensselaer Polytechnic Institute, Troy, NY12180-3590, USA, (1994).
[17] Drew,  D.A.  and  Lahey,  R.T.  An  Ensemble Averaging Model for Dilute Invisid Two-Phase Flow, Center for Multiphase Research RPI, Troy, NY, USA, (1999).
[18] Lahey, Jr., R.T. and Drew, D.A., An Analysis of Two-Phase Flow and Heat Transfer Using a Multi-Dimensional, Four Field, Two-Fluid Model, Proc. of NURETH-9, San Francisco, CA USA, (1999).
[19] Drew, D.A.  and  Passman, S. L.,  “Theory of Multicomponent Fluids”, Springer Publications, (1999).
[20] Drew, D.A. and Lahey, R.T., An Analysis of Two-Phase Flow and Heat Transfer Using a Multidimensional Multi - field, Two - Fluid Compu-tational Fluid Dynamics (CFD) Model, Japan/US Seminar on Two-Phase Flow Dynamic, Santa Barbara, CA USA, (2000).
[21] Lahey, R.T. and Drew, D.A., An Analysis of Two-Phase Flow and Heat Transfer Using a Multidimensional Four-Field, Two-Fluid Model, J. Nuclear Eng. and Design, 204, 29 (2001).
[22] Galimov, A. Yu., Drew, D. A., Lahey, R. T. and Moraga, F. J., The Analysis of Interfacial Waves,
J. Nuclear Eng. and Design
, 235, 1283 (2005).
[23] Lahey, Jr., R.T., The Simulation of Multidimensional Multiphase Flows, J. Nuclear Eng. and Design,
235, 1043 (2005).
[24] Moraga, F.J., Larreteguy, A.E., Drew, D.A. and Lahey Jr., R.T. A Center-Averaged Two-Fluid Model for Wall-Bounded Bubbly Flows, Computers & Fluids, 35, 429 (2006).
[25] Zboray, R. and Cachard, F., Simulating Large-Scale Bubble Plumes Using Various Closure and Two-Phase Turbulence Models, J. Nuclear Eng. and Design, 235, 867 (2005).
[26] Li, Xiangdong, Wang, Rongshun, Huang, Rongguo and Shi, Yumei, Numerical Investigation of Boiling Flow of Nitrogen in a Vertical Tube Using the Two-Fluid Model, Applied Thermal Engineering, 26, 2425 (2006).
[27] Li, Xiangdong, Wang, Rongshun, Huang, Rongguo and Shi, Yumei, Numerical and Experimental Investigation of Pressure Drop Characteristics During Upward Boiling Two-Phase Flow of Nitrogen, International Journal of Heat and Mass Transfer, 50, 1971 (2007).
[28] Politano, M.S., Carrica, P.M. and Converti, J., A Model for Turbulent Polydisperse Two-Phase Flow in Vertical Channels, InternationalJournalof Multiphase Flow, 29, 1153 (2003).
[29] Collier, J.G. and Thome, J.R., “Convective Boiling and Condensation”, Oxford Presses Publication, (1994).
[30] Anglart, H., Nylund, O., Kurul, N. and Podowski, M.Z., CFD Prediction of Flow and Phase Distribution in Fuel Assemblies with Spacers, J. Nuclear Eng. and Design, 177, 215 (1997).
[31] Yeoh,  G.H.  and  Tub,  J.Y.,  Population  Balance Modelling for Bubbly Flows with Heat and Mass Transfer, Chemical Engineering Science, 59, 3125 (2004).
[32] Yeoh, G.H. and Tub, J.Y., Numerical Modelling of Bubbly Flows with and without Heat and Mass Transfer, Applied Mathematical Modelling, 30, 1067 (2006).
[33] Ishii,  M.  and  Zuber,  N.,  Drag  Coefficient  and Relative Velocity in Bubbly, Droplet or Particulate Flows, AIChE J., 25, 843 (1979).
[34] Ishii, M. and Mishima, K., Two-Fluid Model and Hydrodynamic Constitutive Relations, J. Nuclear Eng. and Design, 82, 107 (1984).
[35] Kurul, N. and Podowski, M.Z., On the Modeling of Multidimensional Effects in Boiling Channels, ANS Proc., National Heat Transfer Conference, Minneapolis, MN. (1991).
[36] Drew,  D.A.  and  Lahey Jr., R.T., Application of General Constitutive Principles to the Derivation of Multidimensional Two-Phase Flow Equation, Int. J. Multiphase Flow, 5, 243 (1979).
[37] Ustinenko, V., Samigulin, M., Ioilev, A., Lob, S., Tentner, A., Lychagin, A., Razin, A., Girin, V. and Vanyukov Ye., Validation of CFD-BWR, A New Two-Phase Computational Fluid Dynamics Model for Boiling Water Reactor Analysis, J. Nuclear Eng. and Design, 238, 660 (2008).
[38] Tomiyama, A., Tarnai, H., Zun, I. and Hosokama, S., Transverse Migration of Single Bubbles in Simple Shear Flow, Chem. Eng. Sci., 57, 1849 (2002).
[39] Lopez de Bertodano, M., Lahey Jr., R.T. and Jones, O.C., Phase Distribution in Bubbly Two-Phase Flow in Vertical Ducts, Int. J. Multiphase Flow, 20 (5), 805 (1994).
[40] Lahey, R.T. Jr., Bertodano, M. and Jones, O.C., Phase Distribution in Complex Geometry Conduits, J. Nuclear Eng. and Design, 141, 177 (1993).
[41] Alajbegovic, A., Drew, D.A. and Lahey Jr., R.T., An Analysis of Phase Distribution and Turbulence Structure in Disperse Particle/Liquid Flow, Chem. Eng. Comm., 174, 85 (1999).
[42] Sato, Y., Sadatomi, M., Sekoguchi, K., Momentum and Heat Transfer in Two-Phase Bubble Flow-I. Theory, Int. J. Multiphase Flow, 7, 167 (1981).
[43] Sharifpur, M., Salehi, M., Nouri Brojerdi, A. and Arefmanesh, A., Ensemble Averaged Two- Phase Flow Numerical Simulation in Vertical Ducts for the Void-Studying Behavior in BWRs, “Proceeding of 11th International Conference on Nuclear Engineering”, ICONE 11 (ASME), Japan, (2003).
[44] Oliveira, P.J., Issa, R.I., Numerical Aspects of an Algorithm for the Eulerian Simulation of Two-Phase Flows, “Proceedings of ECCOMAS 2001”, Swansea, UK, (2001).
[45] Shunyu, SU., Huang, Su-Yi and Wang, Xiao-Mo, Experiments and Homogeneous Turbulence Model of Boiling Flow in Narrow Channels, Heat Mass Transfer, 41, 773 (2005).
[46] Bedirhan, Akdeniz, Kostadin, N. Ivanov and Olson Andy, M., “Boiling Water Reactor Turbine Trip (TT) Benchmark”, Volume III: Summary Results of Exercise 2, Nuclear  Energy  Agency, NEA No. 5437, US Nuclear Regulatory Commission, (2006).
[47] Solis, Jorge, Kostadin N., Ivanov, Baris, Sarikaya, Olson, Andy, M. and Hunt, Kenneth W., “Boiling Water Reactor Turbine Trip (TT) Benchmark”, Volume I: Final Specifications, Nuclear Energy Agency, US Nuclear Regulatory Commission, (2001).
[48] Yadigaroglu,   G.   and   Askari,   B.,   Personal Communication, Nuclear Engineering Laboratory, Swiss Federal Institute of Technology, Institute of Energy Technology, Zurich, Switzerland, (2004).